No Bracket Flotation

Unlimited Working Time –

For bracket positioning and excess flash cleanup.

Heat Curable –

Simply place in a toaster oven for 15 minutes at 325F

Highly Filled Composite

Produces maximum bond strength with all metal, ceramic and plastic brackets. Simply bond in mouth with sealant.

The post Therma Cure 5g Screw Syringe appeared first on Ortho Technology.

The post Etchmaster Tips Large – 25 Pack appeared first on Ortho Technology.

will bond chemically to stainless steel bands and crowns. Removal is all in one piece with cement in the appliance.

Self Mixing –

These syringes mix and dispense the paste in one easy step! the A&B syringes are joined and used special mixing canula tips, which elimnate the operator mixing and provide a consistent, automatic mix every time!

No Messy Powder-Liquids –

Consistently mix viscosity every time.

Extended Working Time –

Four minute working time at room temperature without frozen slab.

Dual Curable – Band-Lok® –

is a dual cure cement. It can be used with or without dental curing light. After flash is cleaned a 20-second light activation allows full protection from moisture. Without light activation a complete set is achieved in 10 minutes.

Available in Natural or Blue Shade, and with or without fluoride.

The post Self Mixing Band-Lok with Tips appeared first on Ortho Technology.

Maximum Cure® :

This sealant will set in a thin layer. A unique catalyst system prevents oxygen interference during polymerization. The whole labial or lingual tooth surface can be sealed.

Maximum Cure® :

Sealant is formulated with a patented fluoride monomer.

Chemical Cure System – No curing Light Required :

With Maximum Cure Sealant, multiple teeth can be sealed in the time it would take to cure one tooth with a light cure material.

20gm Economy Size

The post Maximum Cure Part A / B appeared first on Ortho Technology.

Paste and sealant are formulated with a monomer that contains fluoride and will not reduce bond strength.

Unsurpassed Bond Strength :

The highly filled paste provides a strong mechanical bodn witha ll types of metal and ceramic bracket bases. All plastic and fiber filled brackets will bond chemically to Phase II® when conditioned with Reliance Plastic Conditioner.

Ease of Removal – Phase II® :

has a small particle size glass filler which constitutes a high percentage of the material. The paste forms a solid matrix that bonds stronger to itself than it does to the sealant. As a result, the majority of the paste is removed with the bracket and what remains is easier to remove than conventional composites.

Smooth, Tacky Consistency :

The pastes mix to a viscosity that is easy to apply to the bracket base and will hold the bracket in position after the alignment, without slump. the paste viscosity can be thinned for bonding lingual retainers by adding bonding resin to the mixed paste.

No Refrigeration Required – Phase II® :

Like most Reliance adhesives, Phase II® features a unique catalyst system that does not require refrigeration. An active archwire can be placed 5 minutes after last bracket is in place.

Suggested Uses:

As a Bracket adhesive

The post Phase II Jar 18gm Paste appeared first on Ortho Technology.

Paste and Sealant are formulated with a patented monomer that contains fluoride. It is available without fluoride in Push Syringe Only.

Unsurpassed Bond Strength :

The Light Bond™ Paste is a highly filled material that delivers maximum bond strength in all situations with all types of appliances.

Smooth Tacky Paste Viscosity:

The viscosity of Light Bond™ Paste is very tacky which prevents bracket flotation. If a thinner paste viscosity is desired for bonding lingual retainers and acrylic appliances, Light Bond™ Thin or Medium Paste is available. Please specify when ordering.

Total Paste Polymerization Under All Bracket Bases – Light Bond™ :

Comprised of a catalyst and filler that reflects the light to insure complete polymerization under any appliance: metal, ceramic, sapphire or plastic. One the material has been properly cured, an arch wire can be placed immediately.

Ease of Removal – Light Bond™ :

is a small particle glass filed material designed for orthodontic use that allows maximum penetration of filler into the finest screen mesh base and removal without enamel scarring.

Suggested Uses:

As a Bracket adhesive.

*Not for sale to Canada

The post Light Bond Blue Paste Push Syringe appeared first on Ortho Technology.

Consistently mix viscosity every time.

Bonds to Metal – Band-Lok® –

will bond chemically to stainless steel bands and crowns. Removal is all in one piece with cement in the appliance.

Extended Working Time –

Four minute working time at room temperature without frozen slab.

Dual Curable – Band-Lok® –

is a dual cure cement. It can be used with or without dental curing light. After flash is cleaned a 20-second light activation allows full protection from moisture. Without light activation a complete set is achieved in 10 minutes.

Available in Natural or Blue Shade

The post Band-Lok Part A / B – Syringes appeared first on Ortho Technology.

The post Crown Lok Part A / B – Syringes appeared first on Ortho Technology.

Special posterior pads comfortably hold the cheeks away and allow excellent accessibility to the bicuspid and molar area.

Tension Adjustment –

Spring stainless steel bows allow for adjustment and pivot points provide greater comfort

New Generation Plastic –

The Access cheek retractor uses a proprietary plastic and stainless steel bow to assure unsurpassed durability and dependable use over and over again. Separates into three parts for easy cleaning. The Access is a simple and elegantly engineered plastic cheek retractor that can be chemically or heat sterilized in an autoclave or dry heat sterilized! Adult and Pedodontic size assure the proper fit for any patient.

*Not for sale in Canada.

The post Cheek Retractors – Reliance appeared first on Ortho Technology.